With the development of weaving technology . it is necessary to satisfy the production throung pre-weaving equipment with high quality and high performance . Therefore,we succeed in developing SGA218D intelligence sectional warper.

* 1.The Japanese mitsubishi technology is introduced for the complete set of the electric control of the SGA218D.There are Mitsubishi PLCs and Japanese Panasonic sevo system. And other high-grade electrical equipment such as the American API stepping motor,Japanese DiGital! Microcomputers with touching sensor screens.
* 2.Various kinds of yarm parameters and technological requirements are input into the computer and it automatically does the complicated computation, automatically inspects marking the position of the warping table more precise, truly realizing intelligence.
* 3.The back beam tesion could be set optionally,witch greatly realizes beam reel.
* 4.The large touching sensor secreen features clear display, a large amount of information and sinple operation and there are the function of omnibearing electricity, liquid and steam trouble diagnosis display and warping state display.
* 5.Automutio positioning of the start point and stripe is completed automatically by pressing the key.
* 6.The advanced field general line technology is adopted so that any parament and state of each part of the system and other signals can be transmitted throung a general line equipment commissioning ,diagnosis ang management of the technological paramenters are done in an intellingent way.
* 7.The reliable and complete Disc brake used in motor is adopted for the brake. Which features great brake moment, flexibility and reliability.
* 8.The warping table automatically moves with the incease in the incease in the thickness of the yarnface. This is controlled by a separate stepping motor imported from abroad, so that anequidistance is maintainde betweem the tentering reed and the yarm face. The distance can beset at will according to the technological requirements.

Main Techmical Characteristics

* The ovement of the main machine on the ground rails is controlled by the sevomotor while the lease reed and bobbin creel,etc.are fixed.The warping center is always in alignment during the warping process so that the tension of the edging is uniform.
* The beaming equipment can suit relatively great beaming tension and is suitable for all warping widths within its maximum width and for all forms of beam warping.
* The 1:8 fixed conical drum is made of thin steel sheet. The cone is 1150mm long and use together with the high-precision servomotor warping table, it can satisfy the warping techniques of all varieties. The drum has gone throung high-precision dynamic balance check.
* There are three-point automatic positioning pneumatic type reed. Which features short process and high working efficiency.
* Multiple forms of bobbin creels are available, which can satisfy the technological requirements of different varieties. The spindle space number can be specially arrangde according to the needs of the use.
* Multiple forns of tensioners such as the two-column type tensioner.ring type automatic commpensation tensioer are available for the user to choose from.
* The machine is equippde with the electronic type automatic stop motion,
* Front oiling waxing devices and the staticeliminator are optional.

* 1.Effective width:2300-3600(mm)
* 2.Diameterof beam flange:800,1000(mm)
* 3.Warping speed:0-1000(m/min)
* 4.Sbeaming speed:0-200(m/min)
* 5.Deviation of beaming tension: ≤ ± 2%
* 6.Braking length: ≤2m(500m/min)
* 7.Diameter of drum:1000(mm)
* 8.swift taper:1:8,1:6
* 9.Cone length:1150(mm)
* 10.Stripe traverse speed:0.001-9.9999(mm/r,stepless)
* 11.Deviation of stripe poditioning: ≤0.01mm
* 12.Deviation of stripe traverse:0.02%
* 13.Stripe width:0-450mm
* 14.Panel of microcomputer for warping control:10.4inchtouching sensor screen
* 15.spindle space :250 x 250 or made to order
* 16 Number of spindles:480(wool,cotton & blended yam) 560(chemical fibre filament)
* 17.input voltage:3 x 380V ± 10%
* 18.Warping motor power:7.5Kw
* 19.Beaming motor power:15-18.5Kw
* 20.Weight of the main machine:7000(Kg)
* 21.Weight of creel:2500(kg)